You have landed on the USA website. Click here to change to #destination or select your region.

DW02 PU

$375

$375
  • 5 hand Japanese quartz chronograph with date
  • Custom brass hands
  • 44.5mm surgical stainless steel case
  • Protective raised uni-directional rotating bezel with custom aluminum insert
  • Mineral crystal, screw crown
  • Water resistant 30atm / 300 meter / 900ft
  • Custom molded pu band

Precision is vital. The all new DW02 with aluminum bezel insert allows for precise timekeeping and improved wearability. This classic bezel treatment captures the essence of traditional dive watch construction.
ANATOMY

BAND

Attaches to the case and keeps the watch on your wrist.

 

CASE

Central structure upon which the watch is built. The case houses the movement and dial.

 

BEZEL

Ring around the crystal that serves as alternative time keeping as well as protects the crystal.

 

DIAL

Graphical reference that registers the time as well as communicates the information the watch contains.

 

MOVEMENT

Moves the hands to keep accurate time. The movement is the brain of the watch located directly beneath the dial out of sight.

 

CROWN

Controls the positioning of main hands and date. It is waterproofed by either a gasket or screw down mechanism.

 

PUSHER

Controls the secondary watch functions in chronograph watches.

 

DATE WINDOW

Small window in the main dial revealing the date.

 

SUB DIAL

Small dial positioned below the main dial which contains and communicates all the secondary information such as date, stop watch, 24-hr, etc.

 

CHRONO MINUTE HAND

This hand counts the minutes that have passed in your timing sequence when the chronograph is engaged.

 

1/20TH SECOND HAND

Counts in 1/20th of a second increments when chronograph is engaged. Hand will stop spinning after 30 seconds to preserve battery, but is still keeping the 1/20th of a second time.

 

SECOND HAND

The normal ticking second hand for everyday use.

 

CHRONO SECOND HAND

When chronograph is engaged, this large second hand will keep time at 4 beats / second.

 

To learn more about Electric watch anatomy, visit the WATCH SPECIFICATION PAGE.

FUNCTION

BASIC FUNCTION

To set the date window to the correct date. Pull the crown out 1 click (half way.) Rotate the crown until the date displays accurately.

To set the house and minute hands, pull crown all the way out (2 clicks.) Rotate the crown until the time displays accurately.

 

HOW TO START YOUR CHRONOGRAPH

To begin timing in the stopwatch mode (chronograph), unscrew the top pusher completely and depress one time to begin. Press one time again to stop the stopwatch. Always remember to screw pusher down completely when finished.

To reset the stopwatch function, unscrew the bottom pusher completely and press one time. Always remember to screw down all pushers and completely depress crown before entering water.



WATER RATING: ATM

All electric watches have at least a water rating of 20 atm (200 meters.) That means you can surf, snorkel, spear fish and shower daily in your watch. Be sure to always rinse your watch with clean water after exposure to salt / water / sand.



To learn more about Electric watch function, visit the WATCH SPECIFICATION PAGE.

MOVEMENT

The movement is the brain of the watch. It is the mechanical entity that keeps accurate time. A movement should be evaluated by the functions it provides, how it provides those functions, and the quality of manufacturing. Electric utilizes the most accurate and most durable Japanese and Swiss analog movements on the market.

MIYOTA 2115 (FW01)

3 hand Japanese quartz, hours, minutes, seconds and date. Custom brass hands with branded second hand.
TYPE OF QUARTZ: tuning fork type quartz crystal
FREQUENCY: 32,768hz
ACCURACY: ±20 second / month worn under normal circumstances.
BATTERY: silver oxide sr626sw battery or equivalent
BATTERY LIFE: 3 years
DRIVING SYSTEM: two-pole stepping motor / no jewels
FUNCTION: date calendar, powercell saving reset mechanism (psrm) overloading comprehension device (olcd) digital frequency control (dfc) for time adjustment.

MIYOTA 6S20 (FW02 and DW01)

6 hand Japanese quartz chronograph, hours, minutes, seconds, date, chrono minute, chrono second, chrono 1/20th second. Custom brass hands.
TYPE OF QUARTZ: tuning fork type quartz crystal
FREQUENCY: 32,768hz
ACCURACY: ±20 second / month worn under normal circumstances.
BATTERY: silver oxide sr927w battery or equivalent
BATTERY LIFE: 4 years
DRIVING SYSTEM: two-pole stepping motor / no jewels
FUNCTION: 4 beats center second hand, date calendar, powercell saving reset mechanism (psrm) overloading comprehension device (olcd) digital frequency control (dfc) for time adjustment.

RONDA 8040B (DW01S)

6 hand Swiss quartz chronograph, hours, minutes, seconds, date, chrono 30 minute, chrono second, chrono 1/10th second. Custom brass hands.
TYPE OF QUARTZ: analog quartz crystal
SECOND HAND TORQUE: 6 μnm
MINUTE HAND TORQUE: 300 μnm
CENTER SECOND TORQUE: 7μnm
ACCURACY: -10 / +20 second / month worn under normal circumstances.
BATTERY: 395
BATTERY LIFE: 2 years
DRIVING SYSTEM: 13 jewels / gold plates
FUNCTION: 4 beats center second hand, date calendar, power saving mechanism. Repairable metal movement. 3 wide eye chronograph.

To learn more about Electric watch movement, visit the WATCH SPECIFICATION PAGE.

MATERIALS

316 STAINLESS STEEL

Surgical stainless steel prevents specific forms of corrosion. It is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 304. 316 is often used for building nuclear reprocessing plants. It is generally used in stainless steel watches and marine applications, as well as exclusively in the fabrication of reactor pressure vessels for boiling water reactors, due to its high resistance to corrosion. 316 SS allows for precision machining and is used in electric’s cases, crowns, pushers, case backs and band hardware.

 

304 STAINLESS STEEL

Grade 304 is the standard “18/8” stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. Electric uses 304 SS in our stainless steel bands.

 

CHEMICAL ETCHING

The process of using strong acid or mordant to cut into the unprotected parts of a metal surface to create a design or pattern. FW02 and DW01 models use this etching process to achieve the etched numbers and indicies in the bezel.

 

HARDENED MINERAL CRYSTAL

Jewels serve two purposes in a watch. First, they are implemented to reduced friction and can in turn, increase accuracy. Friction in the wheel train bearings and the escapement causes slight variations in the impulses applied to the balance wheel, causing variations in the rate of timekeeping. The low friction of jewel surfaces reduces these variations. Secondly, jewels can increase the life of the bearings. In un-jeweled bearings, the pivots of the watch’s wheels rotate in holes in the plates supporting the movement. The sideways force applied by the driving gear causes more pressure and friction on one side of the hole. In some of the wheels, the rotating shaft can eventually wear away the hole until it is oval shaped, and the watch stops.

 

POLYURETHANE (PU)

Polyurethanes are used in the manufacture of flexible, high-resilience foam seating; rigid foam insulation panels; micro-cellular foam seals and gaskets; durable elastomeric wheels and tires (such as roller coaster wheels); automotive suspension bushings; electrical potting compounds; high performance adhesives; surface coatings and surface sealants; synthetic fibers (e.g., spandex); carpet underlay; hard-plastic parts (e.g., for electronic instruments); hoses and skateboard wheels. Fully reacted polyurethane is chemically inert. PU is highly moldable and desirable for watch bands due to its natural flexibility and soft feel against the skin. Unlike woven fabric bands or natural leather bands, PU is non-porous and quick drying, ideal for uses in and around water.

 

PVD

Physical vapor deposition is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various work piece surfaces. PVD is a common IP plating process used in the watch industry. The coating method involves purely physical processes such as high temperature vacuum evaporation with subsequent condensation, or plasma sputter bombardment rather than involving a chemical reaction at the surface to be coated as in chemical vapor deposition.

 

TITANIUM CARBIDE

Is an extremely hard (MOHS 9-9.5) refractory ceramic material, similar to tungsten carbide. It is commercially used in tool bits. It has the appearance of black powder with nacl-type face centered cubic crystal structure. Titanium carbide is also used as a surface coating on some titanium watches. Electric uses titanium carbide in its PVD coating process for all black coatings, mainly seen on the bezel.

WARRANTY

Electric offers a limited lifetime warranty on all watch movements and cases. There is a limited warranty on workmanship and materials for a period of (5) years after original purchase from an authorized Electric dealer. The limited warranty on battery life is (2) years from date of purchase.

This warranty does not cover normal wear and tear on, watch crystal, watch case, or abrasions to the strap or bracelet. Electric’s warranty does not cover internal or external damage caused by abuse or mishandling.

If Electric products are proven defective, Electric will replace them at no cost to you. If products are not considered defective, Electric will repair your product at a reasonable charge with your authorization. This warranty applies only to Electric watches purchased from authorized Electric dealers and is valid for the original purchaser only.

Shipping

FREE GROUND SHIPPING AND FREE RETURNS ON ALL US ORDERS(Excluding Alaska and Hawaii)

 

A prepaid return shipping label will be included in all orders shipped FedEx. If you aren’t happy with your purchase, we will happily accept a return for a full refund. Our 365-day return policy has no special catches or exceptions. All we ask is that you send the items back to us in the original packaging, and make sure that the products are in the same condition as when you received them. Send the product back to us and we will take care of everything.

 

48 STATES PRICING:

 

FEDEX GROUND - FREE, LIMITED TIME

$0



FEDEX EXPRESS 2DAY


$15



FEDEX OVERNIGHT


$30


USPS (APO/FPO/PO BOX)


$10




AK, HI, PR, GU PRICING:

 

FEDEX GROUND

$10



FEDEX EXPRESS 2DAY


$35


 

 

This map illustrates service schedules in business days for FedEx Ground shipments. Cutoff time for same day shipping is 3pm PST for ground, 2nd day and USPS shipping. Overnight shipping cutoff time is 1pm PST. Free return shipping valid on orders shipped FedEx only.

Reviews